In a few words
|Type of movement||Pulse motion with vibration|
|Type of head||22 sticks (10cm)|
|Rpm of the head||2000 rpm @ 14V DC|
|Motor||12- 14V/ 600 Watt (600W ροπή)|
|Output||200 kg olive seed/hour|
|Initial length||2.20 – 2.65m (3,65m with extension)|
|Extension||Optional Extention 1.0m|
|Cable length||15m for generator or battery use|
|Average consumption||8A / hr|
- Place the injection pins of the cord to the respective current supplier (generator, battery, rectifier 12VDC). There is not polarity (+ -), so it does not matter how you place the pins as long as they connect properly to the receptors of the supplier.
- Start the generator or battery or 12VDC rectifier. The consumption of the devices is 8Α/h.
- Press the on-off switch at the base of the harvester. The harvester is now working.
Εν δράση (videos)
Angelis 1 in slow motion
ANGELIS 1 is our first olive rake harvester that has been prevailing on the market for 30 years.
It is the first alternating motion harvester, patented since 1973, first with an air motor, then an oil one and finally an electric motor.
It has been a revolutionary device in the olive harvesting domain, introducing for the first time the pulse motion and is still the foundation for the manufacture of pulse motion harvesters.
22 sticks (10cm) friendly to olive trees and seeds
An aluminium tube for lower weight
A stainless-steel mechanism for endurance
With anti-vibration rings for easy handling
The Greek farmers have named it KOU-PE-PE (after the name of a children’s game) because of the circular pulse motion of its head. The head is equipped with 22 plastic sticks (7 double and 2 quadruple), tree friendly, 10cm long each, placed in a cross shape, thus allowing for the maximum performance without damaging the olives.
The sticks are attached on the square-shaped inner axis of the head.
Its tube is made of aluminum, has a 7mm threaded rod made of silver steel and it is protected by anti-vibrant rubber and ertalon rings.
Electric DC 200W performance 2000 rpm at 14V.
With the switch of on-off 35A and unit conversion of its movement to pulse
It works with simple battery car with fuel consumption of just 8A / h.
Supplied with 15 m cable
It has an electric DC 600W motor with an induction hardened metallic gear, an οn-off 35A switch and a reducer to convert the motion to pulse. The reducer through a compler conveys the motion from the axis to the head which can then reach a performance rate of 2000 rpm/12V. The AGGELIS 1 operates with DC 12-14V. It can also work on a car battery and it consumes just 8A/h. If however you wish to use a purchased or a makeshift battery, you should put a voltmeter at the output, to ensure that the voltage does not exceed the 14V.